This unit is brand new, our company paid just over $8,800 15 months ago.


Wet mix dust collector, fabricated from 14 gauge stainless steel which is then thermoset powder coat painted.
Manual water level system whereby the customer fills the unit with more water when the water level gets to a certain level marked on the site glass.
Manual drain valve located at the bottom of the separator.
Initial stainless steel venturi entry for deep penetration into the water, secondary baffles to completely mix the dust particulate with the water whereby no after dry/hepa filter is required.
Site glass to visually check the water level.
Automatic low water shut down sensor which prevents the unit from operating if water is not set at proper levels.
A time delay switch is provided to prevent the start of the dust-producing process (sanding tools) until the collector is in complete operation.
An off delay time switch is provided which allows the system to run for a set amount of time once the sanding has stopped. This ensures all dust in the hose reaches the collector.
System includes (2) 25’ lightweight anti-static hose with attached airline

Call or text Tim @ 480.201.7941.